iPartshop Repair and Replacement LCD Display Touch Screen Digitizer Assembly for iPhone 6 Plus (AT&T/ Verizon/ Sprint) 5.5 inch 2015 + Free Advanced Customization Tools (Black)

This complete Touch Screen Digitizer + LCD combination for iPhone 6 Plus 5.5 inch .
If you have a cracked glass, broken LCD, partial image or issues with your Touch Screen sensitivity then this iPhone 6 Plus 5.5 inch Touch Screen digitizer is exactly what you need!

It is highly suggested that all items be tested before fully installing. Any item found to have been fully installed and broken during the installation process is not returnable or replaceable. Inspect the item closely before installing.
We are recommend that if you have not repaired a wireless device in the past that you consult a professional before purchasing.
Some items have adhesive on them and adhesive must be loosened to successfully remove broken glass. Trying to remove broken glass can cause damage or destroy an LCD.
Instructions are NOT provided. Best place to find step by step videos is on YouTube.

Troubleshooting Tips
If you are experiencing any installation issues, please follow any of these steps:
1. Please check to make sure the flex cable is in good condition and there is no debris on the connector.
2. Disconnect and reconnect the cable from the motherboard side.
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4. Make sure your OS is upgraded to the latest version.
5. Leave the phone alone for a bit in a dry environment. Sometimes there is static after install that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning.