Tactic AnyLink2 2.4GHz SLT Universal Radio Adapter

Your transmitter alone can only do so much. But your transmitter with the AnyLink2 2.4GHz Radio Adapter can work wonders. Adding it enables your transmitter to broadcast a true, 2.4GHz signal and operate with the utter dependability of the best in 2.4GHz technology. The AnyLink2 adapter is compatible with an incredibly wide range of transmitters, as well as incredibly simple and easy to install. And once it is installed, your transmitter can fly all Tx-R (Transmitter-Ready) aircraft and any aircraft with a 2.4GHz SLT receiver. That includes huge scale aircraft, park flyers and helis, whether they use glow, gasoline or electric power.

Features:

• Compatibility with even more transmitters, including many Airtronics transmitters.
• A replaceable, rechargeable 1S LiPo battery and USB charger. The battery fits inside the AnyLink2 and provides 15 hours of flying time per charge. And if you use the included charger, it takes less than an hour to recharge.
• Three adapter cables. Redesigned to work with even more transmitters — and equipped with headphone-type connectors for easy, plug-in installation and solid, connections.
• Cleaner, easier installs for JR and Spektrum owners. You just plug one end into your radio, the other into the AnyLink2 and you're done!
• Easy mapping. Just push the MODE button until the LED appears opposite the letter code for your radio!
• Includes built-in clip that snaps onto metal carrying handles plus hard locking mounting strips for backplate mounting.

Includes:

• AnyLink2 2.4GHz Radio Adapter
• 1S 3.7V 450mAh LiPo battery, TACP0011
• Cable A, JR, Spektrum, Graupner, TACM0010
• Cable B, Futaba Square, TACM0011
• Cable C, Spektrum, Hitec, TACM0012
• TC10 USB Charger, TACP0010
• Two Hard Locking Adhesive Strips
• Instruction Sheet

Requirements:

• Charging battery with included USB charger before use
• Aircraft transmitter with DSC or trainer jack

Specifications:

• Compatible Receivers: Tactic 2.4GHz, Tx-R aircraft, receivers having SLT protocol
• Frequencies: 2.403-2.479GHz
• Modulation: FHSS spread spectrum
• Flight Range: Full range
• Input Power: 3.30 - 4.20V, 25mA
• Power Control: Automatic with incoming signal recognition
• Power On Indicator: Red LEDs with audible tones
• Low Voltage Alarm: Audible tones at 3.25V
• Inactivity Alarm: Tones sound after 5 minutes of transmitter activity
• Output Power: < 0.1W
• Case Dimensions: 2.68 x 1.46 x 0.98" (68 x 37 x 25mm)
• Weight: 1.62oz (46g)

Comments:

• Adapter cables for the original AnyLink and the AnyLink2 are not cross compatible.
• AnyLink2 is only compatible with SLT receivers.

AnyLink2 Compatibility Chart