SuperDroid Robots LT2-F Tracked ATR Robot Platform

This is SuperDroid Robots second generation of the LT-F robot. This package is the same as the LT2 Treaded Robot, but has the addition of a flipper/stabilizer arm on it allowing it to climb and descend virtually anything. The robot is a light weight tough robot that can go over and under many obstacles.

Standard Configuration:
Includes Heavy Duty Aluminum LT2-F Robot Chassis, hardware, electronics, etc. The center cavity is large enough for the motors, batteries, electronics, cameras, etc. The LT2-F chassis includes two battery compartments between the wheels and tracks providing even more room for your electronics. The top is flanged with CNC cut holes that are tapped for mounting the aluminum cover.
Two heavy duty IG52-04 planetary 285 RPM gear motors (one per track) driven by a chain and sprocket with a 1:2 reduction.
A single heavy duty IG52-04 planetary 44 RPM gear motor driven with a 1:3 reduction for the flipper arm.
LT2 Generation 4 Pair of Tracks and Wheel Set - Standard Tread.
Variable speed and direction differential drive/steering.
Two Interstate 12 Volt 7.2 Ah Sealed Lead Acid Batteries providing 1-4 hours of operation depending on use.
Includes battery charger(s).
This robot comes complete with a motor controller for drive motors.
The flipper/stabilizer motor controller is also included. SyRen 10 Flipper/Stabilizer motor controller.
This robot includes a Spektrum remote control to wirelessly drive the robot.
Dimensions:The robot is about 26.5 inches long (track tip to tip) by about 7 inches high. It is about 19 inches wide.
Speed: The standard motors drive this robot up to 270 feet per minute.
Weight: The total weight of this configuration is ~50 lbs.
Assembly: This robot is fully assembled and tested and ready to go.