Sun YOBA Solar Charge Controller Solar Controller 30A 12V/24V CMTP02-2430

Safety:
Full consideration to the safety of persons and property has been given when designing the products. However the incorrect connection may cause the system breakdown or even safety accident. For your safety and benefits:
Please notice that installation of this product shall be tinder the guidance of the professionals in this field.
. Please check the rated voltage of solar panel, battery, and loads before connection. 12V rated voltage is 12V, 24V rated voltage is 24V, 48V rated voltage is 48V.
. Make sure connections between positive and negative poles of Solar panels, Battery and Loads are correct.
. The total rated current of solar panel and loads must be smaller than the rated current of the controller.
Components of system must be correctly and firmly connected. Prevent the terminals from oxidation and moldy, to avoid connection trouble.

PARAMETERS:
Load current: 10A/20A/30A
Rated voltage:12V/24V
Empty load consumption: 0.05W
Charge circuit voltage drop: Less than or equal to 0.02V
Discharge circuit voltage drop: Less than or equal to 0.15V
Over voltage protection: 16V;x2/24V
Float charge voltage: 13.8V,x2/24V(till come down to charging recovery voltage)
Charge recovery voltage: 13.8V;x2/24V
Over Discharge recovery voltage: 12.2V; x2/24V
Under voltage: 12.2V; x2/24V
Over discharge voltage: 10.5V; x2/24VTemperature compensation: -3mV/ centigrade /cell
Working temperature: Industrial Grade:-25centigrade~+55 centigrade
Efficiency: 95%~97%

Note: You had better connect to the battery first when you operate the system.
Keep the children away from the solar system.
Package Content:
1 X Solar Charge Controller
1 X English User Manual