SOWTECH 1x2 HDMI Splitter Version 1.4 Full HD 1080P Powered HDMI Splitter 1 in 2 Out Support 3D for Duplicated/Mirror Dual Monitor

This product is designed, manufactured and shipped from the USA. The Falcon Power Supply Unit from Phoenix Engineering is a microprocessor controlled digital AC power source, used for accurate speed control of a turntable motor. The Falcon PSU will work with any AC Synchronous motor that requires 5 Watts or less. The output is 115VAC nominal, but can be used with lower voltage turntables by plugging the motor's wall adapter directly into the Falcon output. The Falcon uses Direct Digital Synthesis to create an extremely accurate and clean sine wave that improves motor speed stability, and allows the user to precisely adjust the turntable platter rotational speed. DDS technology allows the Falcon power supply to generate signals with very high resolution, less than 35µHz steps. During Normal Operation, the user can alter the speed in 0.1 RPM steps; this is used primarily for "tempo" control. The Falcon also has a frequency calibration mode to precisely adjust the output for each speed in 0.01 RPM steps, 10x finer than the Music Hall Cruise Control or Pro-Ject Speed Box II. The Falcon has a serial input for use with the optional RoadRunner digital turntable tachometer (sold separately). The RoadRunner tachometer (sold separately) precisely measures the rotational speed of the turntable platter to 3 decimal places and provides the speed information to the power supply via a 3 wire serial cable. When connected to a RoadRunner tachometer (sold separately), the Falcon power supply automatically synchronizes its output frequency to maintain a constant speed on the turntable, within ±0.005 RPM. No user setup or intervention is needed; plug the cable in between the tachometer and the power supply, and the Falcon immediately locks to the correct speed, even if speed offsets are selected, such as 33.4 RPM.