HDM 50ft Roll Black Racing Fiberglass Exhaust Header Pipe Wrap Tape & Ties Combo KIT

This is a brand new roll of PREMIUM 1/16" x 2" x 50ft BLACK header wrap. This is a first quality black wrap manufactured from high grade 100% fiberglass to withstand continuous temperatures up to 1000 degrees Fahrenheit. Along with this top quality wrap you will receive six (6) stainless steel 5/16" x 14" quick ties for securing the wrap in place after installation. The uses for this wrap are numerous. Its most popular use is to insulate header pipes and other engine components in auto racing. This wrap can reduce under-hood temperatures 50%-70%. It will also protect other under-hood components. This wrap is a 2" wide so you get much more coverage with less footage as compared to narrower wraps. This wrap has a premium weave and is very easy to install. When installing, generally 1/4in overlap is recommended. Do not use this wrap if your engine leaks oil or other fluids. Do not use this as a heat trace insulator on leaky pipes. Fiberglass retain fluids, although the wrap doesnt burn... the fluids in it can. Buyer, user, and installer assume all responsibility for keeping wrap clean and free from fluids and other contaminates. Fully clean and degrease your pipes and let dry completely before installation. No responsible for buyer, user, or installer negligence. Generally it takes 100ft at 2" width to wrap V8 headers. A 2" x 50ft roll can wrap most any small engine header such as karts, mini bikes, or some choppers and pocket bikes. Dont fall for the claims by others sellers calming to offer a higher quality wrap, 100% fiberglass is 100% fiberglass no matter how you look at it. As with any fiberglass product, always wear gloves, long sleeves, long pants, close toed shoes, safety glasses, and a dust mask when handling or installing. Review additional listings if your application requires higher temperature rating. Always check temps before making any wrap purchase. Apply wrap dry recommended. This item exclusive to HDM only