Dynaplug 1007 Tubeless Tire Puncture Repair, Hybrid Edition

The Dynaplug tool design removes the common practice of increasing the size of a puncture hole by reaming. This eliminates the need for a second tool and prevents further damage to the tire caused by reaming the hole to a larger diameter with abrasive tools used in other types of external repair. No Glue Required - After use, tubes of glue dry out in a short time and when you need it again it's dried up. Because repair plugs retain an indefinite sealing characteristic, no glue is required for install or to store for future use. The repair plug (four come with the tool) can permanently seal the puncture hole from the inside out without compromising the tire balance. The repair plug material fuses with the tire rubber to make a permanent repair. This Hybrid Dynaplug model is a limited edition that combines the Dynaplug vintage ABS plastic body with a threaded, removable aluminum nosepiece that secures the removable/replaceable insertion tube used for inserting the repair plug. The same repair plug is used with all Dynaplug tools. The repair plug solution is certified by UTAC, which is a European vehicle test laboratory. It has certified Dynaplug for permanent repairs in tread area for clean punctures up to the size of a 16-penny common nail at speeds of 90mph. Dynaplug tools and repair plugs are made in the USA and covered by an issued Patent. Customer support is readily available by telephone, email and the Dynaplug website.