Baileigh 12.5-Inch Manual Cold Saw, 60Hz, 1Ph 220V (CS-315EU)

Baileigh circular cold saw is the flagship of our EU line of cold saws. It designed to give any shop years of service without breaking the bank. The cold saw is a powerful machine that can cut through solids, tubing or pipe. The head has a strong motor coupled to a direct drive gear box that allows the blade to cut through the material chatter free which increases blade life. The saw has a thick cast iron base making it very rigid. Includes a heavy duty steel base that is set at the optimal cutting height. This is the perfect machine for small to medium fabricating shops and best yet it requires just 220 Volt, 60Hz, 1-Phase power. Spins at 52 revolutions per minute. Perfect for mild steel cutting, but it will also handle other material with the proper blade. Like all other Baileigh circular cold saws, it comes with a powerful integrated coolant pump that cools the blade and washes chips away. It can miter 45 degree to the left and 45 degree to the right. The vise has a taper lock system that helps increase production when a lot of cutting is required. The vise on cold saw clamps on both sides of the cut increasing blade life. The vise jaws are serrated for maximum hold. Maximum blade diameter: 12-1/2-inches; operation: manual; head miter: 45 degree left and 45 degree right; round solid at 45 degree: 2- inches; square tube at 45 degree: 3-13/64-inches by 3-13/64-inches; round tube at 45 degree: 4-inches; rectangle tube at 45 degree: 3-1/4-inches by 2-3/4-inches; round solid at 90 degree: 2-inches; rectangle tube at 90 degree: 4-1/4-inches by 2-3/4-inches; square tube at 90 degree: 3-13/64-inches by 3-13/64-inches; round tube at 90 degree: 4-inches; coolant system: yes; vice style: single action with cam lock; maximum vice opening: 4-23/32-inches; head style: pivot; arbor size: 1-17/64-inches; motor: 2.5 horsepower; blade speed: 52 revolutions per minute; power: 220 volts/1-phase.