2pc 25mm (1") Hubcentric 5x114.3 Wheel Spacers (66.1 bore, 12x1.25 Studs) for Nissan Infiniti G35 G37 FX35 FX50 350z 370z Altima Maxima 300zx 240sx Rogue Murano Sentra

Item Specifications:
Quantity: Two (2)
Thickness: 1.0" (25mm)
Bolt Pattern: 5x114.3 or 5x4.5
Centerbore: 66.1mm
Stud/Nut Thread Pitch: 12x1.25
Material: T6 Aerospace Grade Aluminum

Applications:
1995-1998 Nissan 240SX (Will NOT fit Base Models)
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2017 Nissan 370Z
2002-2017 Nissan Altima
1995-2017 Nissan Maxima
2003-2016 Nissan Murano
2008-2016 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2017 Nissan Sentra

2003-2012 Infiniti FX35
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
2008-2013 Infiniti G37
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45

IMPORTANT - Must check before purchasing
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 1.0" (25mm). If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 1.0" (25mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find the correct item.
- No Returns or Exchanges once installed.

Contact Us
Our experienced and knowledgeable staff are here to help with any questions or problems you may have. Simply copy and paste the following link to your browser:
https://www.amazon.com/ss/help/contact/?_encoding=UTF8&ref_=v_sp_contact_seller&sellerID=A23ID4AZTDBV78